Controls
MicroTech III® Controls
Application SoftwareArchives
MicroTech III® Controls
Application SoftwareArchives
- LonWorks® Plug-in Software for MicroTech® III WSHP LonWorks Communication Modules - 2,493K
Software file of the LonWorks Plug-In Software for use with a MicroTech III LonWorks communication module. Note that LonMaker, or other LNS supported by the Echelon Corp., must be installed on the PC. Refer to IM 933, the LonWorks Plug-In Software manual, for detailed instructions. ! Important - Please Read Before Installing Update! To install, click Download and save the zip file to your local hard drive. Open the zip file from your hard drive. Double-click on the Set-up file and follow the steps provided in the Install Program. - MicroTech® III Application Software for Applied Rooftop and Self Contained Units, 2506017205 (08/09) - 1,044K
MicroTech III Applied Air Handling Unit application and firmware files for applied rooftop and self-contained units with MicroTech III units controllers. Important - read before installing - Open 2506017205.zip and read MicroTech III Controller Upgrade Procedures prior to downloading files. ! WARNING ! Downloading the wrong application can cause equipment damage and severe personal injury. Application codes must be used only by trained technicians experienced with the particular equipment. Installer assumes liability for use of correct codes.